top of page

Group

Public·7 members

Icom Cloning Software CS-P7 For Icom IC-E7 Free Fixed Download


Icom Cloning Software CS-P7 For Icom IC-E7 Free Download




If you are an owner of an Icom IC-E7 handheld transceiver, you might be interested in using the Icom Cloning Software CS-P7 to customize your radio settings and channels. The CS-P7 is a software tool that allows you to create, edit, and transfer data files between your PC and your IC-E7. You can also use it to clone data from one IC-E7 to another.




Icom Cloning Software CS-P7 For Icom IC-E7 Free Download



In this article, we will explain what the CS-P7 can do, how to use it, and where to get it for free. We will also provide some tips and tricks to make the most out of this software.


What is the Icom Cloning Software CS-P7?




The Icom Cloning Software CS-P7 is a Windows-based application that enables you to manage the memory channels and settings of your IC-E7. You can use it to create data files on your PC and transfer them to your IC-E7 via a serial cable (OPC-478 or OPC-478U). You can also use it to read data from your IC-E7 and save them on your PC.


With the CS-P7, you can perform various operations on your data files, such as:


  • Add, delete, or edit memory channels and their names, frequencies, tones, offsets, etc.



  • Change the scan edge channels and the scan resume conditions.



  • Adjust the squelch level, beep level, power save function, etc.



  • Copy or swap data between different banks or files.



  • Clone data from one IC-E7 to another IC-E7 of the same model.



The CS-P7 is compatible with the following versions of Windows: 95, 98, Me, NT4.0 (SP6), 2000 (SP4), XP (SP3), Vista (SP2), 7 (SP1), 8, 8.1, and 10. It requires a minimum of 16 MB of RAM and 10 MB of hard disk space.


How to Use the Icom Cloning Software CS-P7?




To use the Icom Cloning Software CS-P7, you will need the following items:


  • An Icom IC-E7 handheld transceiver with a battery pack or an external DC power supply.



  • A PC with a serial port or a USB port.



  • A serial cable (OPC-478 or OPC-478U) to connect your PC and your IC-E7.



  • The CS-P7 software installed on your PC.



To use the CS-P7 software, follow these steps:


  • Connect your PC and your IC-E7 with the serial cable.



  • Turn on your IC-E7 and set it to VFO mode.



  • Run the CS-P7 software on your PC.



  • Select the COM port that corresponds to your serial cable from the menu bar.



  • Select "Read" from the menu bar to read data from your IC-E7 and display it on the screen.



  • Edit or create data files as you wish using the buttons and menus on the screen.



  • Select "Write" from the menu bar to transfer data from your PC to your IC-E7.



You can also use the CS-P7 software to clone data from one IC-E7 to another IC-E7 of the same model. To do this, follow these steps:


  • Connect your PC and your source IC-E7 with the serial cable.



  • Turn on your source IC-E7 and set it to VFO mode.



  • Run the CS-P7 software on your PC.



  • Select "Read" from the menu bar to read data from your source IC-E7 and display it on the screen.



  • Disconnect your source IC-E7 from the serial cable and connect your target IC-E7 instead.



  • Turn on your target IC-E7 and set it to VFO mode.



  • Select "Write" from the menu bar to transfer data from your PC to your target IC-E7.



Where to Get the Icom Cloning Software CS-P7 For Free?




If you want to get the Icom Cloning Software CS-P7 for free, you have a few options. You can either:




  • Contact an authorized Icom dealer or service center and ask them for a copy of the software. They may provide it for free or for a small fee. You can find a list of authorized Icom dealers and service centers at https://www.icomjapan.com/support/world/



  • Contact Icom Inc. directly and request a copy of the software. They may provide it for free or for a small fee. You can contact them by email at info@icom.co.jp or by phone at +81-6-6793-5302



The best way to get the Icom Cloning Software CS-P7 for free is to contact an authorized Icom dealer or service center or Icom Inc. directly. They will guarantee that you will get a genuine software that will work perfectly with your radio.


Conclusion




The Icom Cloning Software CS-P7 is a useful tool that allows you to customize your Icom IC-E7 handheld transceiver. You can use it to create, edit, and transfer data files between your PC and your radio. You can also use it to clone data from one radio to another. The software is compatible with various versions of Windows and requires a serial cable to connect your PC and your radio.


If you want to get the Icom Cloning Software CS-P7 for free, you can download it from some websites that offer it for free, but with some risks and drawbacks. You can also contact an authorized Icom dealer or service center or Icom Inc. directly and ask them for a copy of the software. They will provide you with a genuine software that will work perfectly with your radio.


The Icom Cloning Software CS-P7 is a software that will enhance your experience with your Icom IC-E7. It is a software that you should get if you own this radio. Get your Icom Cloning Software CS-P7 for free today and start customizing your radio!


What are the Features of the Icom Cloning Software CS-P7 For Icom IC-E7?




The Icom Cloning Software CS-P7 For Icom IC-E7 is a software that has many features that make it easy and convenient to use. Here are some of the features of the CS-P7 software:


  • It has a user-friendly interface that shows the data files and the radio settings in a clear and organized way.